Menu

15% off until August 5

Menu

Buy NowView Cart

Up to 30% off - Audio Modeling SWAM + Divisimate Bundles available now!

Templates

On this site you can download dedicated templates and presets for Divisimate – for free.

These DAW Templates are not meant to be plug and play!

It’s essentially impossible to provide templates that will open on every system exactly the same way. They are meant to be a starting point for everyone who wants to use Divisimate with certain instruments, and we wanted to provide a universal orchestral layout in Divisimate that allows people to share presets.

Please note that if you don’t own all instruments and plugins used in the templates, they will not sound the same. Carefully read the instructions for the templates of your choice to understand what is required to make them work on your system.

SWAM Orchestral Template

A full orchestral template utilizing the SWAM instruments by Audio Modeling in a unified layout, including a selection of orchestration presets.

Since all instruments are physically modeled, this template is very heavy on CPU – but if your machine can run it, it is extremely expressive and sounds great!

These templates are using SWAM Solo Strings V2. We are currently working on updated templates for SWAM Strings V3.

  • Port 1: Piccolo
  • Port 2: Flute 1
  • Port 3: Flute 2 / Alto Flute
  • Port 4: Oboe 1
  • Port 5: Oboe 2
  • Port 6: English Horn
  • Port 7: Clarinet in Bb 1
  • Port 8: Clarinet in Bb 2
  • Port 9: Bass Clarinet
  • Port 10: Bassoon 1
  • Port 11: Bassoon 2
  • Port 12: Contrabassoon
  • Port 13: Horn in F 1
  • Port 14: Horn in F 2
  • Port 15: Horn in F 3
  • Port 16: Horn in F 4
  • Port 17: Trumpet in Bb 1
  • Port 18: Trumpet in Bb 2
  • Port 19: Trumpet in Bb 3
  • Port 20: Trumpet in Bb 4
  • Port 21: Tenor Trombone 1
  • Port 22: Tenor Trombone 2
  • Port 23: Tenor Trombone 3
  • Port 24: Bass Trombone
  • Port 25: Tuba
  • Port 26: Piano
  • Port 27: Harp
  • Port 28: Violin 1
  • Port 29: Violin 2
  • Port 30: Violas
  • Port 31: Celli
  • Port 32: Double Basses

(On Logic Pro X this is split into separate templates for Strings, Brass and Woodwinds)

If you do not own one of these products, the template could still be useful, but you may need to use different instruments and/or do your own positioning & reverb.

 

Dynamics: CC11 (Expression)

Vibrato Depth: CC01 (Modwheel)

Refer to the Teaser A Template Walkthrough to understand the setup of the Strings.

Choose your DAW

Instructions:

  • Download the files from the link below and unpack the archive to a destination of your choice.
  • Open Divisimate, and press Ctrl/Cmd+M to navigate to the presets folder. Copy the contents of the “Divisimate Presets” folder from the download into the Presets folder.
  • Close Divisimate once and open it again to allow it to initialize the new presets in the folder
  • If you are on Mac, make sure to open Divisimate before you open your DAW
  • Start Cubase and open the SWAM Orchestra.cpr project file.
  • Depending on your system you may need to reconnect the tracks to the Divisimate Ports the first time you open the project. Refer to the ensemble layout above to get the right port numbers for each track.
  • Optional: Load a sample library of your choice into the “Insert String Section”-Slots
  • Record Enable all routed tracks (you can use the top “Orchestra” folder for that)

You should now be able to play the template with Divisimate and quickly load the presets from the copied folder.

Download:

Cubase Pro 10.5 – SWAM Orchestra Template & Presets

Instructions:

  • Download the files from the link below and unpack the archive to a destination of your choice.
  • Open Divisimate, and press Ctrl/Cmd+M to navigate to the presets folder. Copy the contents of the “Divisimate Presets” folder from the download into the Presets folder.
  • Close Divisimate once and open it again to allow it to initialize the new presets in the folder
  • Start Pro Tools and open the SWAM Orchestra.ptx project file.
  • If you have not used Divisimate in ProTools yet, you may need to enable the 32 Divisimate Ports as input devices under Setup/MIDI/MIDI Inputs.
  • If you are on Mac, make sure to open Divisimate before you open your DAW
  • Depending on your system you may need to reconnect the tracks to the Divisimate Ports the first time you open the project. Refer to the ensemble layout above to get the right port numbers for each track.
  • Optional: Load a sample library of your choice into the “Insert String Section”-Slots
  • Record Enable all routed tracks

You should now be able to play the template with Divisimate and quickly load the presets from the copied folder.

Download:

Pro Tools – SWAM Orchestra Template & Presets

Instructions:

  • Download the files from the link below and unpack the archive to a destination of your choice.
  • Open Divisimate, and press Ctrl/Cmd+M to navigate to the presets folder. Copy the contents of the “Divisimate Presets” folder from the download into the Presets folder.
  • Close Divisimate once and open it again to allow it to initialize the new presets in the folder
  • Start Reaper and open the Divisimate_AM_Template.rpr project file.
  • Depending on your system you may need to reconnect the tracks to the Divisimate Ports the first time you open the project. Refer to the ensemble layout above to get the right port numbers for each track.
  • If you are on Mac, make sure to open Divisimate before you open your DAW
  • Optional: Load a sample library of your choice into the “Insert String Section”-Slots
  • Record Enable all routed tracks (you can use the “Orchestra” Folder track for that)

You should now be able to play the template with Divisimate and quickly load the presets from the copied folder.

Download:

Reaper – SWAM Orchestra Template & Presets

Instructions:

  • Download the files from the link below and unpack the archive to a destination of your choice.
  • Open Divisimate, and press Ctrl/Cmd+M to navigate to the presets folder. Copy the contents of the “Divisimate Presets” folder from the download into the Presets folder.
  • Close Divisimate once and open it again to allow it to initialize the new presets in the folder
  • Start Studio One and open the SWAM Orchestra.song project file.
  • If you have not used Divisimate in Studio One yet, you will need to set up the 32 Divisimate Ports as input devices. Refer to our Quickstart to learn how that works.
  • If you are on Mac, make sure to open Divisimate before you open your DAW
  • Depending on your system you may need to reconnect the tracks to the Divisimate Ports the first time you open the project. Refer to the ensemble layout above to get the right port numbers for each track.
  • Optional: Load a sample library of your choice into the “Insert String Section”-Slots
  • Record Enable all routed tracks

You should now be able to play the template with Divisimate and quickly load the presets from the copied folder.

Download:

Studio One – SWAM Orchestra Template & Presets

Since Logic can only handle 16 Ports at once, we created separate templates for Brass, Woodwinds and Strings, leaving the remaining ports free for you to use. 

We went ahead and created tracks for the remaining Ports, so you can just load in other instruments there.

As the instrument layout is different, these templates come with their own presets.

Instructions:

  • Download the files from the link below and unpack the archive to a destination of your choice.
  • Open Divisimate, and press Ctrl/Cmd+M to navigate to the presets folder. Copy the contents of the “Divisimate Presets Logic Pro X” folder from the download into the Presets folder.
  • Close Divisimate once and open it again to allow it to initialize the new presets in the folder
  • Start Logic and open the Logic project file for the template of your choice.
  • Make sure to open Divisimate before you open Logic, otherwise connections in the environment can be lost.
  • Optional: Load a sample library of your choice into the “Insert String Section”-Slots. Make sure that the instruments are set to receive notes from all MIDI channels (for example the “Omni” setting in Kontakt)
  • Record Enable all tracks

Download:

Logic Pro X – SWAM Orchestra Template & Presets

Note: This Template was created with Divisimate 1.0.1 – you don’t need to enable Logic Mode to use it.

SWAM Big Band Template

A template for a classic Big Band ensemble utilizing the SWAM instruments by Audio Modeling in a unified layout, including a selection of orchestration and voicing presets.

This template only uses 16 Ports, and is the same across all DAWs, including Logic Pro X.

  • Port 1: Alto Saxophone 1
  • Port 2: Alto Saxophone 2
  • Port 3: Tenor Saxophone 1
  • Port 4: Tenor Saxophone 2
  • Port 5: Baritone Saxophone
  • Port 6: Trumpet 1
  • Port 7: Trumpet 2
  • Port 8:Trumpet 3
  • Port 9:Trumpet 4
  • Port 10: Trombone 1
  • Port 11: Trombone 2
  • Port 12: Trombone 3
  • Port 13: Bass Trombone
  • Port 14: Piano/Guitar
  • Port 15: Bass
  • Port 16: Drums

If you do not own one of these products, the template could still be useful, but you may need to use different instruments and/or do your own positioning & reverb.

Dynamics: CC11 (Expression)

Vibrato Depth: CC01 (Modwheel)

 

Check out our Walkthrough Video to understand how this template is set up.

Choose your DAW

Instructions:

  • Download the files from the link below and unpack the archive to a destination of your choice.
  • Open Divisimate, and press Ctrl/Cmd+M to navigate to the presets folder. Copy the contents of the “Divisimate Presets” folder from the download into the Presets folder.
  • Close Divisimate once and open it again to allow it to initialize the new presets in the folder
  • If you are on Mac, make sure to open Divisimate before you open your DAW
  • Start Cubase and open the SWAM Big Band.cpr project file.
  • Record Enable all routed tracks

You should now be able to play the template with Divisimate and quickly load the presets from the copied folder.

Download:

Cubase Pro 10.5 – SWAM Big Band Template & Presets

Instructions:

  • Download the files from the link below and unpack the archive to a destination of your choice.
  • Open Divisimate, and press Ctrl/Cmd+M to navigate to the presets folder. Copy the contents of the “Divisimate Presets” folder from the download into the Presets folder.
  • Close Divisimate once and open it again to allow it to initialize the new presets in the folder
  • Start Pro Tools and open the SWAM Big Band.ptx project file.
  • If you have not used Divisimate in ProTools yet, you may need to enable the 32 Divisimate Ports as input devices under Setup/MIDI/MIDI Inputs.
  • If you are on Mac, make sure to open Divisimate before you open your DAW
  • Depending on your system you may need to reconnect the tracks to the Divisimate Ports the first time you open the project. Refer to the ensemble layout above to get the right port numbers for each track.
  • Record Enable all routed tracks

You should now be able to play the template with Divisimate and quickly load the presets from the copied folder.

Download:

Pro Tools – SWAM Big Band Template & Presets

Instructions:

  • Download the files from the link below and unpack the archive to a destination of your choice.
  • Open Divisimate, and press Ctrl/Cmd+M to navigate to the presets folder. Copy the contents of the “Divisimate Presets” folder from the download into the Presets folder.
  • Close Divisimate once and open it again to allow it to initialize the new presets in the folder
  • Start Reaper and open the SWAM Big Band.rpr project file.
  • Depending on your system you may need to reconnect the tracks to the Divisimate Ports the first time you open the project. Refer to the ensemble layout above to get the right port numbers for each track.
  • If you are on Mac, make sure to open Divisimate before you open your DAW
  • Record Enable all routed tracks (you can use the “Big Band” Folder track for that)

You should now be able to play the template with Divisimate and quickly load the presets from the copied folder.

Download:

Reaper – SWAM Big Band Template & Presets

Instructions:

  • Download the files from the link below and unpack the archive to a destination of your choice.
  • Open Divisimate, and press Ctrl/Cmd+M to navigate to the presets folder. Copy the contents of the “Divisimate Presets” folder from the download into the Presets folder.
  • Close Divisimate once and open it again to allow it to initialize the new presets in the folder
  • Start Studio One and open the SWAM Big Band.song project file.
  • If you have not used Divisimate in Studio One yet, you will need to set up the 32 Divisimate Ports as input devices. Refer to our Quickstart to learn how that works.
  • If you are on Mac, make sure to open Divisimate before you open your DAW
  • Depending on your system you may need to reconnect the tracks to the Divisimate Ports the first time you open the project. Refer to the ensemble layout above to get the right port numbers for each track.
  • Record Enable all routed tracks

You should now be able to play the template with Divisimate and quickly load the presets from the copied folder.

Download:

Studio One – SWAM Big Band Template & Presets

Instructions:

  • Download the files from the link below and unpack the archive to a destination of your choice.
  • Open Divisimate, and press Ctrl/Cmd+M to navigate to the presets folder. Copy the contents of the “Divisimate Presets” folder from the download into the Presets folder.
  • Close Divisimate once and open it again to allow it to initialize the new presets in the folder
  • Start Logic and open the Logic project file for the template of your choice.
  • Make sure to open Divisimate before you open Logic, otherwise connections in the environment can be lost.
  • Record Enable all tracks

Download:

Logic Pro X – SWAM Big Band Template & Presets

Note: This Template was created with Divisimate 1.0.1 – you don’t need to enable Logic Mode to use it.

Instructions:

  • Download the files from the link below and unpack the archive to a destination of your choice.
  • Open Divisimate, and press Ctrl/Cmd+M to navigate to the presets folder. Copy the contents of the “Divisimate Presets” folder from the download into the Presets folder.
  • Close Divisimate once and open it again to allow it to initialize the new presets in the folder
  • Start Ableton Live and open the SWAM Big Band.als project file.
  • If you are on Mac, make sure to open Divisimate before you open your DAW
  • Depending on your system you may need to reconnect the tracks to the Divisimate Ports the first time you open the project. Refer to the ensemble layout above to get the right port numbers for each track.
  • Record Enable all routed tracks

You should now be able to play the template with Divisimate and quickly load the presets from the copied folder.

Download:

Ableton – SWAM Big Band Template & Presets

Stay up to date

Don’t miss any news! Allow us to let you know what we are up to.

By signing up to our newsletter you accept our privacy policy. You’ll have the option to opt-out of the newsletter at any time. We won’t share your data with third parties and won’t send you spam emails.

Compose.
Orchestrate.
Perform.

Vision of a workflow.

DivisiMate

Facebook Youtube Twitter
  • Copyright © 2020 Nextmidi. All rights reserved.
× Shopping Cart

Your cart is empty.